‧DC‧SD180GAP
176x176x89mm / 7X3.5inch
485~230 CFM
Plastic Impeller
  Rated
Volt		 Voltage
Range

Input
Power

 Rated
Current		 Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ
Curves 		UL
Model No VDC VDC Watt Amp RPM CFM m3/min Inch/H2O mm db(A)    
SD180GAP-12SH** 12 9~13.8 64.8 5.4 3600 485 13.7 0.89 22.61 65 SH £
SD180GAP-12HH** 12 9~13.8 50.4 4.2 3100 410 11.6 0.75 19.05 60 HH £
SD180GAP-12H** 12 9~13.8 23 1.9 2600 350 9.9 0.55 13.97 53 H £
SD180GAP-12M** 12 10~14 13.2 1.1 2100 290 8.2 0.47 11.94 46 M £
SD180GAP-12L** 12 10~14 5.5 0.45 1600 230 6.5 0.23 5.84 39 L £
SD180GAP-24SH** 24 12~27.6 63.6 2.65 3600 485 13.7 0.89 22.61 65 SH £
SD180GAP-24HH** 24 12~27.6 50.4 2.1 3150 420 11.9 0.76 19.3 61 HH £
SD180GAP-24H** 24 12~27.6 24
(~27.6) 		0.97
(~1.15) 		2600 350 9.9 0.55 13.97 53 H £
SD180GAP-24M** 24 12~28 13 0.52 2100 290 8.2 0.47 11.94 46 M £
SD180GAP-24L** 24 12~28 5 0.20 1600 230 6.5 0.23 5.84 39 L £
SD180GAP-48SH** 48 24~53 62.4 1.3 3600 485 13.7 0.89 22.61 65 SH £
SD180GAP-48HH** 48 24~53 49.4 1.03 3150 420 11.9 0.76 19.3 61 HH £
SD180GAP-48H** 48 24~55 23.5 0.48 2600 350 9.9 0.55 13.97 53 H £
SD180GAP-48M** 48 28~58 14.5 0.30 2100 290 8.2 0.47 11.94 46 M £
SD180GAP-48L** 48 30~62 5.8 0.12 1600 230 6.5 0.23 5.84 39 L £
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • Sinwan reserves the right to change data and improve electrical & mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Microprocessor brushless DC Motor, auto cutoff, auto restart
      Burnout Protection: Electronically protected, polarity protected
      IP Protection: IP55,56 optional request
      Frame: Aluminum die cast, black color(AP) or natural color(AN)
      Impeller: 5 blades, glass fiber reinforced plastic, rated UL94V-0
      Bearing: Two ball bearings
      Rotation: CW seen on rotor
      Connection: Wire lead or terminal flat pin connecting
      Weight: 1500 g (3.3 Lbs)
      Dielectric Strength: 500 VAC/min. Max leakage 500mA
      Speed Control: Optional:PWM, S/C NTC thermister on request
      Signal Output: Optional:R/D alarm output, tachometer output
      Operating Temp: -20C~+65C
      Storage Temp: -20C~+75C (at 65%RH)
      Life Expectancy: L10 90K hours at 35C, 35K hours at 60C

     

    Metal Fan Guard
    G180-11