‧AC‧S127AP
127x127x38.5mm/5x1.5inch
130 CFM
Sinwan Plastic Impeller Tubeaxial Fan
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
S127AP-11-1** 115 100~120 50/60 16/14 (~25) 2600/2750 115/130 3.3/3.7 0.29/0.25 7.37/6.35 46 2/1 £
S127AP-11-2** 115 100~120 50/60 12/10 (~17) 2300/2250 102/100 2.9/2.8 0.27/0.23 6.86/5.84 37 4/3 £
S127AP-11-3** 115 100~120 50/60 9/7 1600/1200 75/65 2.1/1.8 0.18/0.14 4.57/3.56 25 6/5 £
S127AP-11-3 (33)** 115 100~120 50/60 9/7 1200/1000 66/55 1.9/1.6 0.15/0.12 3.81/3.05 20 £
S127AP-22-1** 230 200~240 50/60 16/14 (~25) 2600/2750 115/130 3.3/3.7 0.29/0.25 7.37/6.35 46 2/1 £
S127AP-22-2** 230 200~240 50/60 12/10 (~17) 2300/2250 102/100 2.9/2.8 0.27/0.23 6.86/5.84 37 4/3 £
S127AP-22-3** 230 200~240 50/60 9/7 1600/1200 75/65 2.1/1.8 0.18/0.14 4.57/3.56 25 6/5 £
S127AP-11/22-1**
dual voltage 		115
230 		100~120
200~240 		50/60 16/14 (~25) 2600/2750 115/130 3.3/3.7 0.29/0.25 7.37/6.35 46 2/1 £
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Shaded pole induction, inner rotor, 1-phase
      Burnout Protection: Impedance protected
      IP Protection: -
      Frame: Aluminum die cast, black(S127AP)
      Impeller: 5 blades, glass fiber reinforced plastic, rated UL94V-0
      Bearing: Two ball bearings, or sleeve bearing
      Rotation: CCW seen on rotor
      Connection: Wire leads, terminal flat pin
      Weight: 600 g (1.32 Lbs)
      Dielectric Strength: Over 1 min.at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output:
      Operating Temp: Non-condensing ball bearing (-20C~+70C), sleeve (-10~+40C)
      Storage Temp: -40C~+100C (at 65%RH)
      Life Expectancy: Ball bearing 85K hours at 45C, 40K hours at 60C

     

    Metal Fan Guard
    G127-8


    Plastic Fan Guard
    G127P2