‧DC‧SD254AP
Dia.254x88.9mm / 10x3.5inch
1000~350 CFM
Plastic Impeller
  Rated
Volt		 Voltage
Range

Input
Power

 Rated
Current		 Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ
Curves 		UL
Model No VDC VDC Watt Amp RPM CFM m3/min Inch/H2O mm db(A)    
SD254AP-12SH** 12 9~13 64.8 5.4 2400 830 23.5 0.78 19.81 60 SH R
SD254AP-12HH** 12 9~13 50.4 4.2 2200 750 21.2 0.69 17.53 56 HH R
SD254AP-12H** 12 9~13 23 (~37.2) 1.9 (~3.1) 2000 690 19.5 0.58 14.73 47 H R
SD254AP-12M** 12 9~14 13.2 (~18) 1.1 (~1.5) 1650 550 15.6 0.37 9.4 39 M R
SD254AP-12L** 12 10~16 5.5 0.45 1000 350 9.9 0.25 6.35 28 L R
SD254AP-24SHH** 24 16~27 100.8 4.2 3000 1000 28.3 1.05 26.67 75 SHH £
SD254AP-24SH** 24 16~27 63.6 2.65 2500 850 24.1 0.83 21.08 62 SH R
SD254AP-24HH** 24 16~27 50.4 2.0 2300 760 21.5 0.71 18.03 58 HH R
SD254AP-24H** 24 16~27 36 1.5 2000 690 19.5 0.58 14.73 47 H R
SD254AP-24M** 24 16~27.6 28.8 1.2 1650 550 15.6 0.37 9.4 39 M R
SD254AP-24L** 24 18~30 16.8 0.7 1000 350 9.9 0.25 6.35 28 L R
SD254AP-48SHH** 48 24~53 96 2 3000 1000 28.3 1.05 26.67 75 SHH £
SD254AP-48SH** 48 24~53 62.4 1.3 2500 850 24.1 0.83 21.08 62 SH R
SD254AP-48HH** 48 24~53 62.4 1.3 2300 760 21.5 0.71 18.03 58 HH R
SD254AP-48H** 48 24~53 48 1.0 2000 690 19.5 0.58 14.73 49 H R
SD254AP-48M** 48 24~56 33.6 0.7 1650 550 15.6 0.37 9.4 39 M R
SD254AP-48L** 48 28~58 5.8 0.12 1000 350 9.9 0.25 6.35 28 L R
  • **="WB" for wire leads connecting, "TB" for push-in flat pins terminal or terminal block connecting, with Ball bearings
  • Sinwan reserves the right to change data and improve electrical & mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Microprocessor CPU controlled brushless DC Motor, auto cutoff, auto restart
      Burnout Protection: Electronically protected, polarity protected
      IP Protection: IP55, IP68 (Optional)
      Frame: Aluminum die cast, black color treatment
      Impeller: 3 blades, glass fiber reinforced plastic, rated UL94V-0
      Bearing: Two ball bearings
      Rotation: CCW seen on rotor
      Connection: Wire leads or push-in flat pins terminal connecting, terminal block optional.
      Weight: 1,830 Gm (4 Lbs)
      Dielectric Strength: 500 VAC/min. Max leakage 0.5mA
      Speed Control: Optional:PWM, S/C NTC thermister, 0~10V control voltage S/V
      Signal Output: Optional:R/D alarm, tachometer F/G outputs
      Operating Temp: -20C~+65C
      Storage Temp: -20C~+75C (at 65%RH)
      Life Expectancy: L10 90K hours at 35C, 40K hours at 60C

     

    Metal Fan Guard
    G254-9D, G254-9DU