‧AC‧SK162
Dia.143x50mm / 6inch
210~115 CFM
Plastic Impeller
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
SK162AP-11-HHH 115 100~120 50/60 30/26 2500/2800 183/210 5.2/5.9 0.47/0.43 11.94/10.92 47 £
SK162AP-11-HH 115 100~120 50/60 24/20 2250/2400 165/180 4.7/5.1 0.40/0.36 10.16/9.14 40 £
SK162AP-11-H 115 100~120 50/60 18/16 1600/1550 120/115 3.4/3.3 0.31/0.26 7.87/6.6 31 £
SK162AP-22-HHH 230 200~240 50/60 30/26 2500/2800 183/210 5.2/5.9 0.47/0.43 11.94/10.92 47 £
SK162AP-22-HH 230 200~240 50/60 24/20 2250/2400 165/180 4.7/5.1 0.40/0.36 10.16/9.14 40 £
SK162AP-22-H 230 200~240 50/60 18/16 1600/1550 120/115 3.4/3.3 0.31/0.26 7.87/6.6 31 £
  • The stated airflow, air pressure, noise levels are measured with housing orifice dia.: impeller Φ +1~1.5mm, at distance: approx. height of impeller + motor frame. The optimal operating data can only be depended on the installation conditions.
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Shaded pole induction, 1-phase
      Burnout Protection: Impedance protected
      IP Protection: IP44
      Frame: Aluminum die-cast, black color cosmetics
      Impeller: Glass fiber reinforced PBT thermoplastic impeller, UL94V-0
      Bearing: Two precision double sealed ball bearings
      Rotation: CW seen on rotor
      Connection: Wire lead
      Weight: 910Gm(2.0Lb)
      Dielectric Strength: Over 1 min. at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output: -
      Operating Temp: Ambient non-condensing -30~+70C
      Storage Temp: -40C~+100C (at 65%RH)
      Life Expectancy: 50K hours at 35C, 40K hours at 65C