‧AC‧MK172R (A)
Dia.140x48mm / 6 inch
250~123 CFM
Metal Impeller Reverse Airflow
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
MK172RAN11-1** (A) 100 100~120 50/60 47/42 2750/3200 215/250 6.1/7.1 0.51/0.38 12.95/9.65 60 £
MK172RAN11-1** (A) 115 100~120 50/60 47/42 2750/3200 215/250 6.1/7.1 0.51/0.38 12.95/9.65 60 £
MK172RAN11-2** (A) 115 100~120 50/60 35/32 2400/2500 188/195 5.3/5.5 0.37/0.33 9.4/8.38 48 £
MK172RAN11-3** (A) 115 100~120 50/60 23/20 1500/1650 123/136 3.5/3.9 0.28/0.22 7.11/5.59 36 £
MK172RAN22-1** (A) 200 200~240 50/60 47/42 2750/3200 183/215 5.2/6.1 0.51/0.38 12.95/9.65 60 £
MK172RAN22-1** (A) 230 200~240 50/60 47/42 2750/3000 215/235 6.1/6.7 0.51/0.36 12.95/9.14 59 £
MK172RAN22-2** (A) 230 200~240 50/60 35/32 2400/2500 188/195 5.3/5.5 0.37/0.33 9.4/8.38 48 £
MK172RAN22-3** (A) 230 200~240 50/60 23/20 1500/1650 123/136 3.5/3.9 0.28/0.22 7.11/5.59 36 £
MK172RAN22-1** (A) 230 200~240 50/60 47/42 2750/3200 215/250 6.1/7.1 0.51/0.38 12.95/9.65 60 £
MK172RAN11/22-1** (A)
dual voltage 		115
230 		100~120
200~240 		50/60 47/42 2750/3200 215/250 6.1/7.1 0.51/0.38 12.95/9.65 60 £
MK172RAN2-1** (A) 12 12~14 50/60 47/42 2750/3200 215/250 6.1/7.1 0.51/0.38 12.95/9.65 60 £
MK172RAN4-1** (A) 24 24~28 50/60 47/42 2750/3200 215/250 6.1/7.1 0.51/0.38 12.95/9.65 60 £
MK172RAN6-1** (A) 28 28~34 50/60 47/42 2750/3200 215/250 6.1/7.1 0.51/0.38 12.95/9.65 60 £
MK172RAN8-1** (A) 48 48~58 50/60 47/42 2750/3200 215/250 6.1/7.1 0.51/0.38 12.95/9.65 60 £
MK172RAN38-1** (A) 380 380~420 50/60 47/42 2700/2650 211/207 6/5.9 0.50/0.34 12.7/8.64 60 £
MK172RAN44-1** (A) 440 440~480 50/60 47/42 2750/3200 215/250 6.1/7.1 0.51/0.38 12.95/9.65 60 £
  • The stated airflow, air pressure, noise levels are measured with housing orifice dia.: impeller Φ +1~1.5mm, at distance: approx. height of impeller + motor frame. The optimal operating data can only be depended on the installation conditions.
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Shaded pole induction, 1-phase, 2 pole
      Burnout Protection: Thermally protected, auto cut-off, auto reset
      IP Protection: IP55 or IP56 optional
      Frame: Metal tube with 6 screw hole, made of copper or steel
      Impeller: Metal steel fan blades, welded spoting joint blades & metal rotor
      Bearing: Two high precision permanently lubricated ball bearings
      Rotation: CCW seen on rotor. Reverse Airflow
      Connection: Wire leads
      Weight: 830Gm (1.83Lbs)
      Dielectric Strength: Over 1 min. at 1,500 VAC, 0.5mA, 50/60Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output: Optional:R/D alarm output, F/G tachometer output
      Operating Temp: -20C~+75C
      Storage Temp: -40C~+100C (at 65%RH)
      Life Expectancy: 55K hours at 45°C, 25K hours at 65°C based on life test Formula L10

     

    Metal Fan Guard
    G172-3UT G172-7DU

    Plastic Fan Guard
    G172P


    Plastic Fan Filter
    GRM172-30


    Metal Fan Screen
    MF172S-30N