‧AC‧MK172E
Dia.140x56mm / 6inch
220~100 CFM
Metal Impeller
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
MK172EAN11-1**(100) 100 100~120 50/60 47/42 2750/3200 183/220 5.2/6.2 0.49/0.42 12.45/10.67 60 2/1 £
MK172EAN11-1** 115 100~120 50/60 47/42 2750/3200 183/220 5.2/6.2 0.49/0.42 12.45/10.67 60 2/1 £
MK172EAN11-2** 115 100~120 50/60 35/32 2400/2500 160/165 4.5/4.7 0.42/0.35 10.67/8.89 48 4/3 £
MK172EAN11-3** 115 100~120 50/60 23/20 1500/1650 100/110 2.8/3.1 0.28/0.22 7.11/5.59 36 6/5 £
MK172EAN22-1**(200) 200 200~240 50/60 47/42 2750/3200 183/215 5.2/6.1 0.49/0.42 12.45/10.67 60 2/1 £
MK172EAN22-1** 230 200~240 50/60 47/42 2750/3200 183/220 5.2/6.2 0.49/0.42 12.45/10.67 60 2/1 £
MK172EAN22-2** 230 200~240 50/60 35/32 2400/2500 160/165 4.5/4.7 0.42/0.35 10.67/8.89 48 4/3 £
MK172EAN22-3** 230 200~240 50/60 23/20 1500/1600 100/110 2.8/3.1 0.28/0.22 7.11/5.59 36 6/5 £
MK172EAN22-1**(240) 240 200~260 50/60 47/42 2750/3200 183/220 5.2/6.2 0.49/0.42 12.45/10.67 60 2/1 £
MK172EAN11/22-1**
dual voltage 		115
230 		100~120
200~240 		50/60 47/42 2750/3200 183/215 5.2/6.1 0.49/0.42 12.45/10.67 60 2/1 £
MK172EAN2-1** 12 12~14 50/60 47/42 2750/3200 183/215 5.2/6.1 0.49/0.42 12.45/10.67 60 2/1 £
MK172EAN4-1** 24 24~28 50/60 47/42 2750/3200 183/215 5.2/6.1 0.49/0.42 12.45/10.67 60 2/1 £
MK172EAN6-1** 28 28~34 50/60 47/42 2750/3200 183/215 5.2/6.1 0.49/0.42 12.45/10.67 60 2/1 £
MK172EAN8-1** 48 48~58 50/60 47/42 2750/3200 183/215 5.2/6.1 0.49/0.42 12.45/10.67 60 2/1 £
MK172EAN38-1** 380 380~420 50/60 47/42 2750/3200 183/220 5.2/6.2 0.49/0.42 12.45/10.67 60 2/1 £
MK172EAN44-1** 440 440~480 50/60 47/42 2750/3200 183/220 5.2/6.2 0.49/0.42 12.45/10.67 60 2/1 £
  • The stated airflow, air pressure, noise levels are measured with housing orifice dia.: impeller Φ +1~1.5mm, at distance: approx. height of impeller + motor frame. The optimal operating data can only be depended on the installation conditions.
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Shaded pole induction, 1-phase, 2 pole
      Burnout Protection: Thermally protected, auto cutoff, auto reset
      IP Protection: IP55
      Frame: Aluminum die cast motor frame multi screw mounting type; or 6 screw mounting tube type
      Impeller: Steel metal fan blades integrantly spot welded into rotor for high efficiency
      Bearing: Two high precision permanently lubricated ball bearings
      Rotation: CCW seen on rotor, air direction
      Connection: Wire leads
      Weight: 850Gm (1.87Lbs)
      Dielectric Strength: Over 1 minute at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output: Optional:R/D alarm output, F/G tachometer output
      Operating Temp: Ambient non-condensing -30~+80C
      Storage Temp: -40C~+100C (at 65%RH)
      Life Expectancy: 60K hours at 45°C, 35K hours at 65°C based on life MTBF Formula L10

     

    Metal Fan Guard
    G172-3UT G172-7DU

    Plastic Fan Guard
    G172P


    Plastic Fan Filter
    GRM172-30


    Metal Fan Screen
    MF172S-30N