‧AC‧SB908AN
183x190x70mm
100~28 CFM
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
SB908AN-11-1 115 100~120 50/60 65/80 2650/2800 90/100 2.5/2.8 1.6/1.8 40.64/45.72 69 2/1 £
SB908AN-11-2 115 100~120 50/60 55/70 2400/2300 80/75 2.3/2.1 1.5/1.4 38.1/35.56 56 4/3 £
SB908AN-11-3 115 100~120 50/60 45/60 1400/1700 50/61 1.4/1.7 0.36/0.47 9.14/11.94 48 6/5 £
SB908AN-11-3 (33) 115 100~120 50/60 45/60 1050/850 37/30 1/0.8 0.34/0.28 8.64/7.11 40 £
SB908AN-11-1/2
dual speed 		115 100~120 50/60 65/80
55/70 		2650/2800
2450/2400 		90/100
80/75 		2.5/2.8
2.3/2.1 		1.6/1.8
1.5/1.4 		40.64/45.72
38.1/35.56 		69
56 		2/1
4/3 		£
SB908AN-11-2/3
dual speed 		115 100~120 50/60 55/70
45/60 		2400/2200
1950/1500 		80/75
61/46 		2.3/2.1
1.7/1.3 		1.5/1.4
0.42/0.35 		38.1/35.56
10.67/8.89 		56
48 		4/3
6/5 		£
SB908AN-22-1 230 200~240 50/60 65/80 2650/2800 90/100 2.5/2.8 1.6/1.8 40.64/45.72 69 2/1 £
SB908AN-22-2 230 200~240 50/60 55/70 2400/2300 80/75 2.3/2.1 1.5/1.4 38.1/35.56 56 4/3 £
SB908AN-22-3 230 200~240 50/60 45/60 1400/1600 50/57 1.4/1.6 0.36/0.46 9.14/11.68 48 6/5 £
SB908AN-22-3 (33) 230 200~240 50/60 45/60 1000/900 33/28 0.9/0.8 0.34/0.28 8.64/7.11 40 £
SB908AN-22-1/2
dual speed 		230 200~240 50/60 65/80
55/70 		2650/2800
2450/2400 		90/100
80/75 		2.5/2.8
2.3/2.1 		1.6/1.8
1.5/1.4 		40.64/45.72
38.1/35.56 		69
56 		2/1
4/3 		£
SB908AN-22-2/3
dual speed 		230 200~240 50/60 55/70
45/60 		2400/2100
1950/1400 		80/75
61/46 		2.3/2.1
1.7/1.3 		1.5/1.4
0.42/0.35 		38.1/35.56
10.67/8.89 		56
48 		4/3
6/5 		£
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Capacitor induction, inner rotor, 1-phase
      Burnout Protection: Thermally protected
      IP Protection:
      Frame: Aluminum die cast, natural color, steel plate housing cover
      Impeller: Glass fiber reinforced plastic, rated UL94V-0
      Bearing: Two ball bearings
      Rotation: CW seen on rotor
      Connection: Wire lead
      Weight: 1650 g (3.6 Lbs)
      Dielectric Strength: Over 1 min. at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output: Optional:R/D alarm output, tachometer output
      Operating Temp: Ambient non-condensing -20~+75C
      Storage Temp:
      Life Expectancy: L10 80K hours at +45C, 40K hours at +60C