‧AC‧SB960AP
330x330x89mm
380~110 CFM
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
SB960AP-11-2 115 100~120 50/60 300/350 2200/2300 350/380 9.9/10.8 1.3/1.5 33.02/38.1 66 2/1 £
SB960AP-11-3** (4P) 115 100~120 50/60 80/115 1450/1600 225/245 6.4/6.9 0.74/1.15 18.8/29.21 53 4/3 £
SB960AP-11-2/3
dual speed 		115 100~120 50/60 300/350
80/115 		2200/2300
1450/1600 		350/380
230/255 		9.9/10.8
6.5/7.2 		1.3/1.5
0.76/1.1 		33.02/38.1
19.3/27.94 		66
53 		2/1
4/3 		£
SB960AP-11-3/4/5
triple speed 		115 100~120 50/60 80/115
75/80
68/63 		1370/1450
965/660
830/650 		215/230
160/120
130/110 		6.1/6.5
4.5/3.4
3.7/3.1 		0.78/0.95
0.6/0.45
0.5/0.42 		19.81/24.13
15.24/11.43
12.7/10.67 		55
48
43 		4/3
6/5
8/7 		£
SB960AP-22-2 230 200~240 50/60 300/350 2200/2300 350/380 9.9/10.8 1.3/1.5 33.02/38.1 66 2/1 £
SB960AP-22-3** (4P) 230 200~240 50/60 80/115 1400/1500 225/245 6.4/6.9 0.73/1.1 18.54/27.94 53 4/3 £
SB960AP-22-2/3
dual speed 		230 200~240 50/60 300/350
80/115 		2200/2300
1450/1600 		350/380
230/270 		9.9/10.8
6.5/7.6 		1.3/1.5
0.8/1.05 		33.02/38.1
20.32/26.67 		65
58 		2/1
4/3 		£
SB960AP-22-3/4/5
triple speed 		230 200~240 50/60 80/115
75/80
68/63 		1370/1450
965/660
830/650 		215/230
160/120
130/110 		6.1/6.5
4.5/3.4
3.7/3.1 		0.78/0.95
0.6/0.45
0.5/0.42 		19.81/24.13
15.24/11.43
12.7/10.67 		55
48
43 		4/3
6/5
8/7 		£
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Capacitor induction, inner rotor, 1-phase
      Burnout Protection: Thermally protected
      IP Protection:
      Frame: Aluminum die cast, black color cosmetics , steel
    plate housing cover
      Impeller: Glass fiber reinforced plastic, rated UL94V-0
      Bearing: Two ball bearings
      Rotation: CCW seen on rotor
      Connection: Wire lead or terminal flat pin connecting
      Weight: 5,900Gm (13 Lbs)
      Dielectric Strength: Over 1 min. at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output: Optional:R/D alarm output, tachometer output
      Operating Temp: Ambient non-condensing -20~+65C
      Storage Temp:
      Life Expectancy: L10 70K hours at +45C, 35K hours at +60C

     

    Metal Fan Guard
    G180-11