‧AC‧S225AP

225x225x80mm/8.86x3.15 inch
692 CFM
Sinwan Plastic Impeller, Inner Rotor Tubeaxial Fan
  Rated
Volt
Voltage
Range
Freq Input
Power
Ref.
Speed
Max.Airflow Max.Static Pressure Noise
Level
PQ UL
Model No VAC VAC Hz Watt

RPM

CFM m3/min Inch/H2O mm db(A)    
S225AP-11-1** 115 100~120 50/60 60/70 (~90) 2780/3150 610/692 17.3/19.6 0.87/0.76 22.1/19.3 71 2/1 £
S225AP-11-2** 115 100~120 50/60 40/50 2400/2200 527/483 14.9/13.7 0.71/0.52 18.03/13.21 58 4/3 £
S225AP-11-3** 115 100~120 50/60 25/38 1500/1650 330/362 9.3/10.3 0.51/0.43 12.95/10.92 49 6/5 £
S225AP-11-1/2**
dual speed
115 100~120 50/60 -1 60/70
-2 40/50
2780/3150
2200/2300
610/692
483/505
17.3/19.6
13.7/14.3
0.87/0.76
0.71/0.52
22.1/19.3
18.03/13.21
71 2/1
4/3
£
S225AP-22-1** 230 200~240 50/60 60/70 (~90) 2780/3150 610/692 17.3/19.6 0.87/0.76 22.1/19.3 71 2/1 £
S225AP-22-2** 230 200~240 50/60 40/50 2400/2200 527/483 14.9/13.7 0.71/0.52 18.03/13.21 58 4/3 £
S225AP-22-3** 230 200~240 50/60 25/38 1500/1650 330/362 9.3/10.3 0.51/0.43 12.95/10.92 49 6/5 £
S225AP-22-1/2**
dual speed
230 200~240 50/60 60/70
40/50
2780/3150
2200/2300
610/692
483/505
17.3/19.6
13.7/14.3
0.87/0.76
0.71/0.52
22.1/19.3
18.03/13.21
71
58
2/1
4/3
£
S225AP-11/22-1**
dual voltage
115
or 230
100~120
200~240
50/60 60/70 2780/3150 610/692 17.3/19.6 0.87/0.76 22.1/19.3 71 2/1 £
S225AP-38-1** 380 380~420 50/60 60/70 2780/3150 610/692 17.3/19.6 0.87/0.76 22.1/19.3 71 2/1 £
S225AP-44-1** 440 440~480 50/60 60/70 2780/3150 610/692 17.3/19.6 0.87/0.76 22.1/19.3 71 2/1 £
  • ** = "WB" for wire lead type Ball bearing, "TB" for push-in terminal type, or Terminal block type with Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
  •  
      Motor Type: Capacitor induction,inner rotor, 1 phase, 2 or 4 pole
      Burnout Protection: Thermally protected, auto cut-off, auto reset
      IP Protection: IP ratings optional on request
      Frame: Aluminum die cast, black coating treatment
      Impeller: 5 blades, glass fiber reinforced plastic, rated UL94V-0
      Bearing: Two ball bearings
      Rotation: CCW seen on rotor, air direction exhaust over struts
      Connection: Wire leads ,or terminal flat pins; terminal block optional
      Weight: 2400 g (5.3 Lbs)
      Dielectric Strength: Over 1 min. at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output: Optional:Motor slow down alarm R/D, tachometer F/G
      Operating Temp: Ambient non-condensing -20~+70C
      Storage Temp: -40C~+100C (at 65%RH)
      Life Expectancy: L10 Formula 80K hours at 35C, 35K hours at 60C

     

    Metal Fan Guard
    G225-5DF, G225-13U