‧AC‧S200RAP
Dia.200x220x70mm/8x2.8inch
510 CFM
Sinwan Plastic Impeller Tubeaxial Fan
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
S200RAP-11-1** 115 100~120 50/60 60/75 (~85) 2800/3200 440/510 12.5/14.4 0.85/0.97 21.59/24.64 66 2/1 £
S200RAP-11-2** 115 100~120 50/60 45/55 2500/2200 398/350 11.3/9.9 0.75/0.55 19.05/13.97 52 4/3 £
S200RAP-11-3** 115 100~120 50/60 23/35 1500/1600 230/260 6.5/7.4 0.45/0.49 11.43/12.45 43 6/5 £
S200RAP-11-1/2**
dual speed,2 pole 		115 100~120 50/60 60/75 (~85)
45/55 		2800/3250
2500/2200 		440/510
398/350 		12.5/14.4
11.3/9.9 		0.85/0.97
0.75/0.55 		21.59/24.64
19.05/13.97 		66
52 		£
S200RAP-11-2/3**
dual speed,4 pole 		115 100~120 50/60 45/55
23/35 		2400/2600
1600/1500 		370/400
260/230 		10.5/11.3
7.4/6.5 		0.72/0.80
0.49/0.45 		18.29/20.32
12.45/11.43 		52
43 		£
S200RAP-22-1** 230 200~240 50/60 60/75 (~85) 2800/3200 440/510 12.5/14.4 0.85/0.97 21.59/24.64 66 2/1 £
S200RAP-22-2** 230 200~240 50/60 45/55 2500/2200 398/350 11.3/9.9 0.75/0.55 19.05/13.97 52 4/3 £
S200RAP-22-3** 230 200~240 50/60 23/35 1500/1600 230/260 6.5/7.4 0.45/0.49 11.43/12.45 43 6/5 £
S200RAP-22-1/2**
dual speed,2 pole 		230 200~240 50/60 60/75 (~85)
45/55 		2800/3250
2400/2600 		440/510
370/400 		12.5/14.4
10.5/11.3 		0.85/0.97
0.72/0.80 		21.59/24.64
18.29/20.32 		66
52 		£
S200RAP-22-2/3**
dual speed,4 pole 		230 200~240 50/60 45/55
23/35 		2400/2600
1600/1500 		370/400
260/230 		10.5/11.3
7.4/6.5 		0.72/0.80
0.49/0.45 		18.29/20.32
12.45/11.43 		52
43 		£
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Capacitor induction, inner rotor, 1-phase
      Burnout Protection: Thermal protector, auto cut-off, auto reset
      IP Protection: -
      Frame: Aluminum die cast, black(S200RAP), natural coating(S200RAN)
      Impeller: 5 blades, glass fiber reinforced plastic, rated UL94V-0
      Bearing: Two ball bearings
      Rotation: CCW seen on rotor
      Connection: Wire leads, terminal flat pin
      Weight: 2,200 g (4.85 Lbs)
      Dielectric Strength: Over 1 min. at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output: Optional:alarm R/D, tachometer F/G
      Operating Temp: Ambient non-condensing -20~+70C
      Storage Temp: -40C~+100C (at 65%RH)
      Life Expectancy: L10 90K hours at 35C, 40K hours at 60C

     

    Metal Fan Guard
    G200-12