‧AC‧S180FAP
180x180x65mm/7x2.5inch
405 CFM
Sinwan Plastic Impeller Tubeaxial Fan
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
S180FAP-11-1** 115 100~120 50/60 60/70 2800/3200 355/405 10.1/11.5 0.66/0.83 16.76/21.08 60 2/1 £
S180FAP-11-2** 115 100~120 50/60 40/50 2400/2350 310/300 8.8/8.5 0.60/0.58 15.24/14.73 47 4/3 £
S180FAP-11-3** 115 100~120 50/60 26/38 1400/1650 180/210 5.1/5.9 0.38/0.43 9.65/10.92 40 6/5 £
S180FAP-11-3 (33)** 115 100~120 50/60 26/38 1100/950 139/120 3.9/3.4 0.28/0.23 7.11/5.84 29 £
S180FAP-11-1/2**
dual speed 		115 100~120 50/60 60/70
40/50 		2800/3200
2400/2350 		355/405
310/300 		10.1/11.5
8.8/8.5 		0.66/0.83
0.60/0.58 		16.76/21.08
15.24/14.73 		60
47 		2/1
4/3 		£
S180FAP-11-2/3**
dual speed 		115 100~120 50/60 40/50
26/38 		2400/2350
2000/1650 		310/300
260/210 		8.8/8.5
7.4/5.9 		0.60/0.58
0.38/0.43 		15.24/14.73
9.65/10.92 		47
40 		4/3
6/5 		£
S180FAP-22-1** 230 200~240 50/60 60/70 2800/3200 355/405 10.1/11.5 0.66/0.83 16.76/21.08 60 2/1 £
S180FAP-22-2** 230 200~240 50/60 40/50 2400/2200 310/280 8.8/7.9 0.60/0.56 15.24/14.22 47 4/3 £
S180FAP-22-3** 230 200~240 50/60 26/38 1400/1650 180/210 5.1/5.9 0.38/0.43 9.65/10.92 40 6/5 £
S180FAP-22-3 (33)** 230 200~240 50/60 26/38 1100/950 139/120 3.9/3.4 0.28/0.23 7.11/5.84 29 £
S180FAP-22-1/2**
dual speed 		230 200~240 50/60 60/70
40/50 		2800/3200
2400/2200 		355/405
310/290 		10.1/11.5
8.8/8.2 		0.66/0.83
0.60/0.58 		16.76/21.08
15.24/14.73 		60
47 		2/1
4/3 		£
S180FAP-22-2/3**
dual speed 		230 200~240 50/60 40/50
26/38 		2400/2350
2000/1650 		310/300
260/210 		8.8/8.5
7.4/5.9 		0.60/0.58
0.38/0.43 		15.24/14.73
9.65/10.92 		47
40 		4/3
6/5 		£
S180FAP-38-1** 380 380~420 50/60 60/70 2750/3150 350/400 9.9/11.3 0.64/0.82 16.26/20.83 60 2/1 £
S180FAP-11/22-1**
dual voltage 		115
230 		100~120
200~240 		50/60 60/70
 2750/3100 350/392 9.9/11.1 0.64/0.82 16.26/20.83 60 2/1 £
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Capacitor induction, inner rotor, 1-phase
      Burnout Protection: Thermally protected, auto cut-off, auto reset
      IP Protection: -
      Frame: Aluminum die cast, black(S180FAP)
      Impeller: 5 blades, glass fiber reinforced plastic, rated UL94V-0
      Bearing: Two ball bearings
      Rotation: CW seen on rotor
      Connection: Wire leads, terminal flat pin
      Weight: 1800 g (4.0 Lbs)
      Dielectric Strength: Over 1 min. at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output: Optional:alarm R/D, tachometer F/G
      Operating Temp: Ambient non-condensing -20~+70C
      Storage Temp: -40C~+100C (at 65%RH)
      Life Expectancy: L10 90K hours at 35C, 40K hours at 60C

     

    Metal Fan Guard
    G180-11