330x330x89 mm, 300~180CFM

 

SD960AN   General specification

 

-Motor: Microprocessor cpu control,auto cutoff /restart, locking & polarity protected
-Frame: Aluminum die cast, black color cosmetics frame with steel housing cover
-Impeller: Glass fiber reinforced PBT thermoplastic impeller, UL94V-0
-Rotation: CCW looking at rotor, air inlet side of housing cover
-Bearing System: Two precision double sealed ball bearings
-Operating Temp: Ball bearing ambient -20C~+65C
-L10 Life: Normally 60,000 hours at 25C, 25,000 hours at 65C
-Dielectric Strength: Over 1 min.at 1,500 VAC/0.5mA, 50/60 Hz
-Connection: Wire leads or push-in terminal for option
-Net Weight: 5650 g (12.5 Lbs)
*DC Metal Fans Nomenclature
*DC Fans Nomenclature series
*AC Fans Nomenclature series

Model
Rated
Voltage
Voltage
Range
Input
Power
Rated
Current
Referenced
Speed
 
Max
Airflow
Max
Pressure
Noise
VDC
VDC
W
A
RPM
 
CFM
Inch/H2O
dB
SD960AN-12H 12 9~13.6 120~128 10~10.6 1600   285 2.2 58
SD960AN-12M 12 9~13.6 74~82 6.2~6.8 1200   220 1.7 49
SD960AN-12L 12 9~14 57~49 4.8~4.1 1000   180 1.4 39
SD960AN-24H 24 18~27.6 115~128 4.8~5.3 1700   300 2.3 60
SD960AN-24M 24 18~28 70~78 2.9~3.3 1200   220 1.7 49
SD960AN-24L 24 18~28 55~47 2.3~1.9 1000   180 1.4 39
SD960AN-48H 48 30~56 115~128 2.4~2.7 1700   300 2.3 60
SD960AN-48M 48 32~60 70~78 1.5~1.6 1200   220 1.7 49
SD960AN-48L 48 30~60 55~47 1.1~0.98 1000   180 1.4 39

**="WB" for wire leads connecting , Ball bearing OORO"TB" for Terminal flat pins push in connecting , Ball bearing

Related Product Information

Please see our related items below for suggested products to use with this item:

  • Metal Fan Guard: G180-11
  • Blower Assembly: Blower Air Duct Assembly

     

    •    
    Related Technical Information



    -Optional Function Leads:

    *Alarm, motor stop, cutoff sensor signals (R/D, run-Low, stop-High for alarm function, color yellow lead)
    *Tach speed sensor output, open collector, 2 square waves per revoluation,
    or TTL 4.4~5 VDC optional (F/G, white lead)
    *Speed control:
    1.S/C, NTC thermister thermal control 1800~3400RPM/4.7~10K ohm vs 45~20C(S/C,orange lead)
    2.PWM, Pulse Width Modulation, microprocessor programmable CPU speed control,10~100%,
    full stop & 10 speed stages; 800~3800RPM (PWM, purple lead)
    3.S/V, Control voltage speed setting, Anolog 0~10V vs speed RPM
    speed control via separate DC low voltage interface (S/V, gray lead)
    * Please visit http://www.sinwan.com.tw/engineering.asp to get engineering information

     

       
    Fan Performance Curves and Dimension

     

    * Sinwan reserves the right to change data and specs without notice
    * Tests are at nominal rated voltage against zero static pressure
    *Specifications subject to change without notice, data tolerance +-10%